Author: Matt Murphy

NASA Texas Oktoberfest 2025

Matt and Pat chat about the NASA Texas Octoberfest event at MSR Cresson and some breaking news related to the 136 car.  The 67 car got buttoned up and ready to race.  Big shout out to Erik and Ben.  The audio quality is terrible.  Have fun. https://drivenasa.com/road-racing/camaro-mustang-challenge/ https://youtu.be/laZpTO7IFtA?si=OJrwOrtEZi30McmK

GMW’s with Mark Hutchison

Matt and Pat interview Mark Hutchison and chat about all of his silly LS swapped BMW adventures.  If you’re in to simplifying the power delivery of a great chassis, tune in, like and subscribe, rate and review.  https://deatschwerks.com https://www.harborfreight.com/10-ton-portable-hydraulic-equipment-kit-58775.html

NASA at Hallett 2025

Matt and Pat chat about the 2025 NASA Summer Shootout at Hallett.  Lots of mixed emotions and great culinary tips.   https://cooking.nytimes.com/recipes/1026814-lomo-al-trapo-salt-grilled-beef-tenderloin https://www.consumerfinance.gov/ask-cfpb/what-is-harassment-by-a-debt-collector-en-336/

Lemons at Hallett 2025

Matt, Pat, Roland, and Alyssa returned from the 24 Hours of Lemons race at Hallett with several hot takes and some quick laptimes.  The 67 car keeps getting more reliable, but we’re still having difficulty making it to the checkers.  We’ll get ’em next time.  Good luck to Roland and Mark at this weekend’s COMMA […]

Demi-glace

Matt and Pat take a break from racing to chat about their demi-glace challenge and all the wonderful outcomes, including fat washed bourbon. https://www.youtube.com/watch?v=N7UQeouQrfE

Atlanta 2024 Review

Matt and Pat chat about the recent Lemons race at Road Atlanta, fat washed bourbon, puff pastry, and the 2024 Racers HQ Driver of the Year.   Like and subscribe, rate and review.  https://www.certifiedangusbeef.com/en/cooking/recipes/Ultimate-Beef-Wellington

3D Printing with Jesse A Barrett

Matt and Pat chat with Jesse about 3D printing and it’s application to motorsports.  We tried to stick to the basics for racers that are new to 3D printing.  Jesse and Pat have lots of great recommendations for printers, mods, materials, software and modeling.    Check out Jesse’s Substack article on the subject: https://jesseabarrett.substack.com/p/so-you-think-you-want-a-3d-printer